Free Rider

首頁 › 車型索引 › Toyota › GR86 (ZN8)

Toyota GR86 (ZN8) 改裝零件及輪圈規格

Toyota GR86 (ZN8) performance parts and wheel fitment specs · 2021–今 / Present

按此車型搜尋零件 Find parts for this car →

輪圈適配規格 Wheel fitment specs

Toyota GR86 (ZN8) 的輪圈 PCD 為 5x100,中心孔 56.1 mm,螺絲規格 M12x1.25,原廠輪圈 18x7.5 ET+48。

年份 Years2021–今 / Present
世代 GenerationsGen 1 (ZN6: 2012–2021), Gen 2 (ZN8: 2021–Present)
底盤代號 ChassisZN8
PCD 螺絲孔距 Bolt pattern5x100
中心孔 Center bore56.1 mm
螺絲規格 Thread sizeM12x1.25
原廠輪圈 Stock wheels18x7.5 ET+48
原廠輪胎 Stock tyres215/40R18 (Michelin Pilot Sport 4)
建議尺寸 貼平 Flush18x8.5 ET+38 to +42 (235/40R18)
建議尺寸 賽道 Track17x9.0 ET+35 to +40 (245/40R17)
建議尺寸 進取 Aggressive18x9.5 ET+38 to +40 (245/35R18 or 255/35R18)
避震結構 SuspensionMacPherson Strut Front / Double Wishbone Rear with Torsen LSD
剎車 Brakes2-Piston Floating Front (294mm) / 1-Piston Rear (290mm)
排氣管徑 Exhaust60.5mm (2.38 in)
引擎 EngineFA24D Boxer-4 D-4S · 2.4L Naturally Aspirated Boxer
原廠馬力 Stock power228 HP / 235 PS @ 7000 RPM
驅動 DrivetrainRWD

規格來自原廠資料及社群量度,改裝前請按實車核對。Specs come from manufacturer data and community measurements; verify on your car before buying.

直接適配零件 Direct-fit parts

已確認直接適配 Toyota GR86 (ZN8) 的改裝零件共 767 件,以下為各分類精選。767 verified direct-fit parts; a selection per category is shown below.

避震 (Suspension)

車輪 (Wheels / Rims)

排氣系統 (Exhaust Systems / Cat-Back)

車燈 (Lighting)

煞車 (Brakes & Big Brake Kits)

燃油及點火系統 (Fuel & Ignition)

引擎性能 (Engine Performance)

傳動系統 (Drivetrain & Clutches)

查看全部 Toyota GR86 零件及到手價 →

港幣價格按匯率估算,未計運費及稅項;到手價請於零件搜尋查看。HKD prices are estimates before shipping and tax.

其他 Toyota 車型 More Toyota models